PDA

View Full Version : GSXR throttle bodies


ravy4000
17-06-2015, 04:56 PM
I am currently working on my 106 prepping it to be a track toy

when it comes to the engine tho I am abit lost unless its off the shelf bolt on

If I was the use GSXR bodies what would I need to get them to work apart from a manifold ?

And how do they compare the jenvey setup

Any help would be much appreciated

matty_d
17-06-2015, 06:13 PM
Contact the Satchell boys for a manifold, although I think they may have stopped making them... I have one and they are bloody good bits of kit.

Other things that you need depending on how far you're taking it, air filter, fuel pressure reg, uprated injectors (although the GSXR injectors will be fine for lower power applications) and standalone ECU. It can be done on the standard ECU though but it's definitely worth upgrading. Upgrading the cams are a good compliment to TBs too.

ravy4000
17-06-2015, 07:06 PM
Thank you

So with regards to attaching the throttle cable and the fuel rail and things like that the standard gsxr setup works ?

matty_d
17-06-2015, 07:14 PM
The Satchell one comes with a modified throttle quadrant for better feel. Can't comment on the Jenvey set up

ravy4000
17-06-2015, 07:47 PM
I just had a look on his site and seen them they look good

TIGgerDave
18-06-2015, 08:37 AM
Hi guys, we have currently discontinued the fabricated manifolds but there is something in a pipeline for future manifolds.

infamous aidy
18-06-2015, 09:34 AM
TIGger dave, do you still do the quadrants?

ravy4000
18-06-2015, 10:53 AM
I will have to keep my eyes on the website then and just crack on with the prep

TIGgerDave
18-06-2015, 02:29 PM
TIGger dave, do you still do the quadrants?

Not really, it isn't something we sell but more of a modification to the original throttle assembly on the k3s/k5s.

ravy4000
18-06-2015, 04:23 PM
Not really, it isn't something we sell but more of a modification to the original throttle assembly on the k3s/k5s.

Does this mean you wont be producing a manifold and setup anymore for GSXR Bodies

infamous aidy
18-06-2015, 04:38 PM
Dave, i have a set of gixxer 600 k3 bodies already with a manifold i just thought if you had a quadrant lying about it'd save me a lot of messing.
If you find one feel free to bob it in with my lower arms. Tony tells me they should be ready toward the end of next week and i'll send you some haribo or something to say thanks ;)