View Single Post
Old 30-09-2017, 08:48 PM   #6
Dieseldave
106 RALLYE REGISTER MEMBER

 
Dieseldave's Avatar
 
Join Date: Sep 2008
Location: Sligo,Ireland
Posts: 1,589
User Gallery
Tacked on 4 sides and sealed from the bottom with white Tiger Seal.

Rear mounts were 30mm round bar drilled and tapped M10. Due to the profile of my Kevlar sump guard
I only needed short mounts. If your using flat alloy sump guard they will need to be longer so use 30mm pipe
And blank the end with a captive nut welded to the inside.
Dieseldave is offline   Reply With Quote