home news shop history forum membership galleries regions calendar contact
   

Go Back   106 Rallye Register Forum > TUNING, MODIFICATIONS & UPGRADES > Electrical & Wiring

Electrical & Wiring Engine management systems, looms, switches, gauges, sensors, etc

Reply
 
Thread Tools Display Modes
Old 05-07-2018, 08:48 PM   #1
KieranC
REGISTERED FORUM USER - NON MEMBER
 
Join Date: Jul 2018
Location: Plymouth
Posts: 3
User Gallery
Help with chassis plug

Hi fellas,

Can anyone help identify what pins are what, the guides on here and the saxo forum say the later model 3 plug ecus used 3 different pin configs but the one i've is completely different.

its a 1.1 independence 2000 model. Any help or information would be much appreciated.

Cheers
Kieran


KieranC is offline   Reply With Quote
Old 06-07-2018, 04:36 PM   #2
MHR1294
106 RALLYE REGISTER MEMBER
 
Join Date: Dec 2013
Location: Perth
Posts: 189
User Gallery
There are only 2 pin configs for 3 plug ecu models.

crossover loom and non crossover loom

Looks very much like a later style 3 plug to me. your plug isn't completely different.

The pins are numbered on the guide left to right, starting at the top. The top left most is no.1 and the bottom right most pin is 37.

A multimeter is your friend.
MHR1294 is offline   Reply With Quote
Old 07-07-2018, 10:39 AM   #3
KieranC
REGISTERED FORUM USER - NON MEMBER
 
Join Date: Jul 2018
Location: Plymouth
Posts: 3
User Gallery
Ah okay thanks ill spend some time today going through it see if i can't make some progress ID'ing the pins not on the guide.

The guide says that the later 3 plug models this should be the pin out:

Also worth stating that all the wire numbers have rubbed off!

These are what are present but not sure if they are actually what the guide say they are
1. CM10E/CC2 - Ignition Live
2. CH07A/C075 - Reverse
3. 100 - Starter

4. 410 - Oil Pressure Red Light
5. 465 - Speedo
6. 820 - Immobiliser
7. 822 - Immobiliser
8. 425/426/429 - Rev Counter
9. 140 - Diagnostic Wire

12. 415 - Oil Level
13. 411 - Oil Temperature

34. 124/120 - Fuel Pump Live
35. 2210/220 - Reverse

-------------------------------------------------

10 & 11 is missing:
10. 141 - Diagnostic Wire
11. 414 - Oil Level

14 to 16 is missing:
14. ?
15. ?
16. ?

18-19 & 21-22 is missing:
18. ?
19. ?
21. ?
22. ?

27-33 is missing:
27. 400 - Coolant Light
28. 401 - Coolant Gauge
29. 480/142 - Engine Management Light
30. 430 - Air-condition Control
31. 8074 - Air-con Wire
32. 8076 - Air-con Wire
33. 8078 - Air-con Wire

36 is missing:
36. 1072 - Alternator Warning Light
KieranC is offline   Reply With Quote
Old 09-07-2018, 05:29 PM   #4
MHR1294
106 RALLYE REGISTER MEMBER
 
Join Date: Dec 2013
Location: Perth
Posts: 189
User Gallery
Try this one. obviously being the 1.1 it won't have the wiring for the oil level and coolant gauges.

Early 3-Plug ECU Chassis Plug (Mk2 saxos & S2 106):

1. CM10E/CC2 - Ignition Live
2. CH07A/C075 - Reverse
3. 100 - Starter
4. 822 - Immobiliser
5. 820 - Immobiliser
6. 2210/220 - Reverse
7. 425/426/429 - Rev Counter
8. 410 - Oil Pressure Red Light
9. 1072/1071 - Alternator Warning Light
10. 414 - Oil Level
11. 415 - Oil Level
12. 821 - Immobiliser
13. 465 - Speedo
14. 140 - Diagnostic Wire
15. 141 - Diagnostic Wire
16. 400 - Coolant Light
17. 401 - Coolant Gauge
18. 480 - Engine Management Warning Light
19. Blank
20. 411 - Oil Temperature
---------
34. 124/120 - Fuel Pump Live
35. 123 - Lambda Sensor Live (Note: this needs bridging with an ignition live if fitting engine to a later 3plug model)

Last edited by MHR1294; 09-07-2018 at 05:37 PM.
MHR1294 is offline   Reply With Quote
Old 09-07-2018, 11:02 PM   #5
KieranC
REGISTERED FORUM USER - NON MEMBER
 
Join Date: Jul 2018
Location: Plymouth
Posts: 3
User Gallery
Thats looking more promising, ill take a gander tomorrow
KieranC is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.