|
|||||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
Problems, Servicing & Repairs Information and topics about technical problems, servicing and repairs to the Rallye |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
WHOOPS! MEMBERSHIP JUST EXPIRED
|
16 valve starting problem
I've recently valved my rallye but Itl no start, the ecu a new unlocked one the pumps no priming an don't seem to have a spark at the plugs, any help would be handy
Would the map sensor on left side of inlet cause this to happen?? Or should I be looking for bad earths?? |
![]() |
![]() |
![]() |
#2 |
106 RALLYE REGISTER MEMBER
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
bad earth on the gearbox.
__________________
The Car In Front's A 16v.
|
![]() |
![]() |
![]() |
#3 |
WHOOPS! MEMBERSHIP JUST EXPIRED
|
Cleaned it up still no difference thinking there's something dodgy in the loom now it is a bit butchered
|
![]() |
![]() |
![]() |
#4 |
WHOOPS! MEMBERSHIP JUST EXPIRED
|
ive had this problem, the stater turn over but the pump dosnt prime and the plus dont start, any ideas? you get your working above?
|
![]() |
![]() |
![]() |
#5 |
106 RALLYE REGISTER MEMBER
![]() |
Following awaiting reply
|
![]() |
![]() |
![]() |
#6 |
106 RALLYE REGISTER MEMBER
![]() ![]() ![]() ![]() ![]() |
quite unlikely, last post is 5 years old.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|