track car project breaking - thousands of pounds of parts available

[Munkul]

Sorry for joining just to sell stuff... but you'll see that it's all high quality gear for very low prices.

It pains me to have to do this, but needs must. This was a good mate’s car which we were slowly building up, now over the last few years we have all ran out of time and money to finish it.
So I need to part it out and sell EVERYTHING. The easiest way to do this, to my mind, is to separate it into job lots – so good engine, good chassis, good ECU, and then miscellaneous parts. If this doesn’t work, I will take offers on individual parts. I know the market isn’t there any more for 106’s but a lot of these parts are hardcore track oriented and very pricey, new. Plus I bet someone wants a clean shell to replace their rusty GTi…
All prices minus postage. To be agreed on. Pickup in person preferable – then you can see what else you may want to buy…!

Pictures are available here (I cba to work out all of the photo links again)

http://106owners.co.uk/forums/showth...arts-available

Car shell with suspension, brakes, etc
W reg s2 shell, no rust, flat-arched, registered as 1.1 on logbook. The arches have been cut out for the GTi arches, done before we bought it and is rough, although no rust present, just needs cleaned up. All other chassis mods have been done to a high standard. Comes with all panels, including loads of spares if you want. There’s around £1100 worth of suspension/brake parts fitted to it alone.
•Engine bay stitch welded to group N spec, seam sealed and painted in 2k
•GAZ GHA coilovers with custom camber adjustable pillowball top mounts, never used
•GAZ adjustable rear dampers included, never fitted
•Standard drum brake rear subframe, standard fuel tank/pump
•Interior stripped, dashboard refitted, painted in truckbed liner for durability, GTi steering wheel with airbag included
•C2 VTS front brakes and new discs/pads, braided hoses fitted
•Uprated front ARB (forget what type) with new droplinks, polybushed
•Uprated wishbone bushes, Spoox/Powerflex, new ball joints, never used
•Rolling on standard GTi wheels for convenience
•Wiring harness split and reconnected using Superconnectors for ease of wiring mods
•brake lines renewed in copper, ABS delete
•cup mirrors binned a long time ago! also short shifter sold separately

This can be delivered anywhere in the country for the right price!
£600.00 ONO

Omex ecu & loom
Brand new in box, never used. Flying loom, genuine Omex, with additional harness for extra functions.
£500.00

106 gti engine
Took from a donor car, compression tested before removal – roughly 175psi on every cylinder, so definitely good engine! Comes with gearbox, inlet/exhaust manifold, wiring loom/ECU etc – just ask me what you want included and I will chuck it in.
£250.00

TU5 JP4 Citroen VTR engine
This is rather special – was a 40k crash damaged C2 VTR engine, with a ported cylinder head, Newman rally max cams, and very lightweight cromoly flywheel. Comes with C2 coilpack, Gti thermostat, oil filter conversion, GTi engine mount conversion, but still with the citroen inlet manifold. No exhaust manifold (unless you want a deal). New standard clutch. Gearbox can be chucked in if you want, too – standard GTi box.
£500.00 ONO

Spoox Motorsport engine mounts
Set of 3, you know how good these are, never used, just fitted.
£120.00

Throttle bodies
Suzuki GSXR1000 2005 throttle bodies, partially disassembled, removed the secondary injectors and butterflies but can be refitted easily
£80.00

driveshafts
106 GTi driveshafts, brand new from QH last year, chamfered at hub end (not rounded)
£50.00

Raceland exhaust manifold
£50.00

Richbrook short shifter & linkages
you know this is a thing of beauty. Works with all 106/saxos. I will throw in the new uprated linkage arms as well, this setup makes the gear shift quality SO nice.
£60.00

Silicon hoses
For 106 GTi, oil cooler pipes chopped and blanked.
£30.00

New radiator
For GTi
£30.00

black Angel eye headlights (fitted to car in first picture)
Need a bit of a clean-up on the lenses, can be done with a headlight restoration kit.
£20.00

there is also a lot of high quality 2k paint - Ford Diamond White - I think 5l white primer, and 3l basecoat, and 5l lacquer, with 5l solvent to match, tack rags, etc - More than enough to paint an entire 106 and all panels etc. About £250 worth - make me an offer.

Anything else... make it worth my while for at LEAST a tenner and I will post or let you collect, etc.

Thanks,
Matthew

[Lonso69]

Pm'd

[A.dueholm]

I could use the raceland manifold, if you would ship to denmark. I will of course pay for the shipping.
Br Anders

[Munkul]

The manifold may already be sold, but I'll let you know.

Cheers,
matthew

[Quickie2012]

Im interested in the Omex if you'd post. Obviously id cover postage but want to see some pictures first please, if possible

[Munkul]

Images are all on the linked thread

Omex:

[Munkul]

all PMs replied to I hope!

Engine sold with cams, manifold sold, seats sold, angel eyes sold, lock set and heater blower sold

[Quickie2012]

Your inbox is full mate & needs emptying so cant reply to your message for the minute!

[Munkul]

Sold so far:
C2 Engine with cams
exhaust manifold
seats
lock set and heater blower
ECU and loom

Angel eyes still not sold, no money received

I may consider breaking the rolling shell for suspenson, wishbones, brakes etc. Although it doesn't make sense to me, because the shell is very good and the coilovers will work best with the integrated top mounts.

Just to remind you all, I won't hold anything for anyone, the first person to pay me money gets the item. Simple.

[shenparbitch]

Nice topmounts.....

[Jimkil]

Price for Gaz coilovers & rear damper set and top mounts. Need quick sale as have to get fitted asap.
Payment by PayPal.
Will need shipped.

Thanks in advance
Jimmy.

Price for Gaz coilovers & rear damper set. Need quick sale as have to get fitted asap.
Payment by PayPal.
Will need shipped.

Thanks in advance
Jimmy.

[Munkul]

hmm. £300 + postage.

text me on 07880770757

just for clarity, the coilover top mounts are Comp Brake, these are a 4 bolt pillowball mount that bolts to a weld-in slotted plate. obviously I can't sell the slotted plate, however I will give the pillowball mount with the coilovers, whether it is usable or not is for you to decide. there are lots of topmount solutions available on the market now, so you will be able to get something to work.

The struts have rebuilt hubs with brand new bearings, never used.

[Jimkil]

Text inbound.

[Munkul]

more parts added to the thread on 106OC

[Lionheart]

Spoox Motorsport engine mounts...need a set of these
Are these early or late models?
And fast road or race/rally version?
Thanks
Rich

[Munkul]

Lionheart, they are to fit the S2 GTi, so whatever these are. I'm not sure whether they are fast road or race, i didnt do the buying and I'm not sure if they have any ID. Thinking about it, they are probably Vibratechnics, as they dont have the Spoox stickers. I remember Spoox just rebranded Vibratechnics mounts.

coilovers, gearshifter and driveshafts provisionally sold.

more parts for sale, pictures on the 106oc thread in OP...
uprated clutch, i will measure diameter when I'm home on saturday (it may be for a 1.4 xsi)
uprated brake pads
2" exhaust backbox, 2" decat pipe, 2.25" dtm backbox
uprated ARB (large diameter)
GTI rear beam in a million bits, everything is there including calipers, apart from discs

[Munkul]

The shell is now scrapped, the following parts are available in addition:

Wishbones - new ball joints, Spoox Motorsport rear mounts, Powerflex front bushes - £80 for the pair
C2 GT front brake calipers, new pads and discs (slight surface rust from sitting) and braided hoses - £60 for the pair
Front ARB, don't remember much about this (is it even uprated? think it's a GTi one) with Powerflex bushes and new droplinks - £50

Steering rod outer ends and middle threaded sleeves - £20











loads of bits and bobs still here - ph2 bumpers, arches, etc. GTi ECU and 2 plug loom, GTi inlet manifold, floor carpet, anything else you can see...

I need a few more hundred quid for my mate then I can call it quits and scrap the rest. At that point, anyone who wants to collect the lot is welcome to it. But we haven't got there quite yet.

[hazlo]

Do you have an unlocked 16v single plug ecu?

[drka-drka]

Engine mounts?

[Munkul]

Hazlo - I don't, its a standard GTi ECU to suit a twin plug loom.

Drka-drka - the mounts are still available

[monkey89]

Any pics of the driveshafts mate I might be interested would you be able to post them too Cheers

[Ridz]

Are the headlights still for sale?

[baka262]

Please write down what you've got rest parts.

Thanks