home news shop history forum membership galleries regions calendar contact
   

Go Back   106 Rallye Register Forum > TUNING, MODIFICATIONS & UPGRADES > Suspension, Handling & Brakes

Suspension, Handling & Brakes Suspension set ups, uprated brakes

Reply
 
Thread Tools Display Modes
Old 10-08-2017, 03:19 PM   #1
moult
REGISTERED FORUM USER - NON MEMBER
 
Join Date: Nov 2010
Location: notts
Posts: 16
User Gallery
New rear axle

Hi guys...

Just purchased a new rear axle from IM. Going to swap it over at the weekend, I've changed axles before but haven't had to remove the rear hubs.
Is there any thing I need to look out for ? Will I require a puller !?

Thanks
moult is offline   Reply With Quote
Old 11-08-2017, 09:32 PM   #2
MHR1294
106 RALLYE REGISTER MEMBER
 
Join Date: Dec 2013
Location: North
Posts: 94
User Gallery
The drums should come off with a hammer. this may split the wheel bearing.

If you need to swap the stub pins that the bearing sits on, it simply hammers out. the end of it is dimpled for hammering out with a drift. don't just hit the end with a hammer or it'll mushroom.

You can cheat and do what I did, to remove the drum simply hammer the stub pin back with the drum still on after removing the nut. this stops the bearing from splitting!

Everything else is bolt on.
MHR1294 is offline   Reply With Quote
Old 12-08-2017, 09:35 AM   #3
VeiRoN
REGISTERED FORUM USER - NON MEMBER
 
Join Date: Jun 2016
Location: South East
Posts: 30
User Gallery
Three legged puller for the hub yes.
VeiRoN is offline   Reply With Quote
Old 12-08-2017, 09:56 AM   #4
moult
REGISTERED FORUM USER - NON MEMBER
 
Join Date: Nov 2010
Location: notts
Posts: 16
User Gallery
Hammering that stub pin through sounds a decent method.
moult is offline   Reply With Quote
Old 18-08-2017, 07:51 PM   #5
moult
REGISTERED FORUM USER - NON MEMBER
 
Join Date: Nov 2010
Location: notts
Posts: 16
User Gallery
Right guys !
Removed the old beam today... goin to replace the brake lines as there slightly corroded. The brake bias value looks like it's seen better days as well but don't really wana buy a new 1 of them. Unsure if it seized cause it isn't under tension cause it's off the car but the bolt is loose to the spring. Has any1 bypassed this ?
Another question I have is are the rear brake protectors needed ? Mine are old and pretty bent ?

Any help would be great ! Thanks
moult is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:16 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.