|
|||||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
106 Rallye Chat & Topics Specific Rallye related chat and discussions only please! |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
REGISTERED FORUM USER - NON MEMBER
|
Rear opening quater glass mk1 - mk2
Are the rear opening quater glass on a mk1 - mk2 106 the same ??
|
![]() |
![]() |
![]() |
#2 |
106 RALLYE REGISTER MEMBER
![]() ![]() ![]() |
Should be, i have phase 1 rubbers (non opening) fitted to my Phase 2
|
![]() |
![]() |
![]() |
#3 |
REGISTERED FORUM USER - NON MEMBER
|
Thanks for the reply, not quite as definitive as I was hoping for, but its a start ;-)
I've roughly sketched up & dimensioned the glass on my ph1, can someone with a ph2 measure there glass & see if its the same ?? https://postimg.org/image/jhu0bippb/ |
![]() |
![]() |
![]() |
#4 |
106 RALLYE REGISTER MEMBER
![]() ![]() ![]() |
I have both types at home, Ill lay one over the other at the weekend and let you know.
I'm sure they are a straight swap. |
![]() |
![]() |
![]() |
#5 |
REGISTERED FORUM USER - NON MEMBER
|
That would be great, thank you ;-)
|
![]() |
![]() |
![]() |
#6 |
106 RALLYE REGISTER MEMBER
![]() ![]() ![]() |
Ok, I just read your first post again and noticed I took you up wrong. Sorry.
You asked about opening glass on both cars but I was talking about fixed glass on S1 & opening on S2 As this was a conversion people used do on competition cars. I can however confirm S1 fixed glass is the same shape and has the same curve as S2 opening glass although About 4mm smaller all around to allow for the rubber. I would be confident that both S1 & S2 opening glass is therefore the same. |
![]() |
![]() |
![]() |
#7 |
REGISTERED FORUM USER - NON MEMBER
|
That's definitive enough for me ;-)
Thanks for taking the time to help out, |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|