RJ tank spec steering arms, any interest?

**welshpug** · 04-01-2018, 12:02 PM

Wondering if there is interest for some of these, will be helping a friend make a set up for his S1 Rallye Rally car build, and as the Tube comes in 6 metre lengths we will have some spare

No Pictures as yet, but they will look much like the ones Tommy_Rallye used to make.

They will allow a small adjustment to the height of the pivot to correct for bump steer at varying ride heights, be stronger than the cranked standard Track rod ends and the tube will be stiffer than the original steering rods.

Devlin · 06-01-2018, 11:57 PM

I'll be interested in a set or two, dependant upon price obviously.

**PHIOMAN** · 21-01-2018, 08:58 AM

Likewise, I'd also be interested in a set or two subject to price.

**welshpug** · 21-01-2018, 10:05 AM

ok, my friend Craig picked up enough material and fixings to make up a few sets, made up one set for his car which we need to get fitted and see how they fit and adjust, might take a little while as he's away with work this week and has a young baby that arrived in late November.

**PHIOMAN** · 26-01-2018, 09:23 AM

No problem Welshpug, just leave a post when they ready and I'll check back then.
Cheers

JO08 · 14-02-2018, 12:06 AM

I could be interested in a set or two if you can post them to portugal

04-01-2018, 12:02 PM	#1
welshpug 106 RALLYE REGISTER MEMBER Join Date: Mar 2006 Location: cwmcarn Posts: 4,913	RJ tank spec steering arms, any interest? Wondering if there is interest for some of these, will be helping a friend make a set up for his S1 Rallye Rally car build, and as the Tube comes in 6 metre lengths we will have some spare No Pictures as yet, but they will look much like the ones Tommy_Rallye used to make. They will allow a small adjustment to the height of the pivot to correct for bump steer at varying ride heights, be stronger than the cranked standard Track rod ends and the tube will be stiffer than the original steering rods.

06-01-2018, 11:57 PM	#2
Devlin REGISTERED FORUM USER - NON MEMBER Join Date: Jun 2014 Location: London Posts: 32	I'll be interested in a set or two, dependant upon price obviously. Last edited by Devlin; 07-01-2018 at 11:47 PM. Reason: additional text

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

21-01-2018, 08:58 AM	#3
PHIOMAN 106 RALLYE REGISTER MEMBER Join Date: Mar 2005 Location: Isle of Man Posts: 100	Likewise, I'd also be interested in a set or two subject to price.

21-01-2018, 10:05 AM	#4
welshpug 106 RALLYE REGISTER MEMBER Join Date: Mar 2006 Location: cwmcarn Posts: 4,913	ok, my friend Craig picked up enough material and fixings to make up a few sets, made up one set for his car which we need to get fitted and see how they fit and adjust, might take a little while as he's away with work this week and has a young baby that arrived in late November.

26-01-2018, 09:23 AM	#5
PHIOMAN 106 RALLYE REGISTER MEMBER Join Date: Mar 2005 Location: Isle of Man Posts: 100	No problem Welshpug, just leave a post when they ready and I'll check back then. Cheers

14-02-2018, 12:06 AM	#6
JO08 REGISTERED FORUM USER - NON MEMBER Join Date: Dec 2017 Location: Portugal Posts: 7	I could be interested in a set or two if you can post them to portugal