bits

quin · 27-11-2007, 06:14 PM

SUSPENSION

pair of trailing arms complete with hubs and cylenders, need bearings, could make for a quick swap on a beam refurb £10 pair

Rear anti roll bar from 106 1.4 xs £10

Pair of FAI wishbones these only covered around 6k so are still nice and clean and bushes are all mint, however both balljoints need replacing as these died prematurely £40 pair

SENSORS/RELAYS/ECUS

Rear wiper relay, in gwo (also lots of other random relays collected from 106’s and 306’s if anything needed I’ll have a look) £3 each

306 1.4xl spi ecu (bosch) £5

BRAKES

Standard used brake hoses £2.50 each

INTERIOR/PLASTICS

s1 rallye fuel pump - return stub snapped off, just swap motor into your casing

£20

Centre section of cam belt cover, v-good condition £4

Top half of steering wheel plastics £3

Ignition lead rack, only 2 clips snapped, so still holds cables perfect £2

plastic bracket from steering wheel which holds the stalks £3

Interior light £2

Rear seat brackets (bottom half of bench slots onto them) £2

ENGINE BAY

Interediate bearing carrier for 2 peice o/s shaft £15

XSI dipstick tube £2

EXTERIOR

Damaged s1 rallye n/s/f arch. mising clips, and the front has been broken off, could be fibreglassed though if you have some artistic flare

£3

smoked front indicators, bought these with the expectation of getting black morretes, but didnt lol, ok Sondition gota be worth £10

s1 near side rear light unit, crack in lense but otheriwse fine, handy if water has corroded yours £5

s1 off side rear light unit, £10

s1 headlights £9 each or £15 pair

306 s1 standard rear lights v-good condition £5 pair

306 s1 near side front indicator unit £3

All prices are + delivery and open to offers. if you would like photos and any extra details then just pm me.

thanks

**freddy6868** · 29-07-2008, 03:49 PM

air temp sensor is that the one that goes in the right hand side of the airbox?

**Nathan Morris** · 29-07-2008, 03:54 PM

your rite john!

**freddy6868** · 29-07-2008, 03:58 PM

yay do i win anything?lol and is it for an s1?

quin · 29-07-2008, 04:06 PM

its for an s1 yea, goes in the side of the throttle body (bulkhead side)

i can take pics of things to people if your usure

**freddy6868** · 29-07-2008, 04:12 PM

can you take a pic of one on the car please as i am not sure if its what i want i thought the air temp sensor went in the side of the airbox?

quin · 29-07-2008, 04:30 PM

not on the s1 rallye it doesnt, no senosrs go in the airbox on the s1 rallye lol, can still take a piccy if you need

**freddy6868** · 30-07-2008, 03:14 PM

yeah please lol

quin · 30-07-2008, 03:34 PM

http://www.106rallyeforum.com/forum2...light=air+temp

ok in the 10th post on there, in the third pic down you can see the air temp sensor (grey) at the bottom of the photo, it has a wire which then goes into the side of the body, hope that helps, its the s2 that has it in the airbox

bobdylan_55 · 01-09-2008, 07:08 PM

dont surpose youve got a spare throttle position sensor? :P

quin · 02-09-2008, 06:42 AM

sorry, sold it with my spare throttle body

**RichHimself** · 30-09-2008, 03:44 PM

Is the rear wiper relay the one for the front under the glovebox?

Do you know if it controls the washer motor for the front?

If so I'm interested in the relay.

quin · 30-09-2008, 03:59 PM

sorry chap, its the small black one that sits with the rear wiper motor in the boot, its a blue one under the dash for the front intermittent wipe etc not sure if it controlls the washer pump too?

**RichHimself** · 30-09-2008, 04:09 PM

Ah that's the one I'm after (the Blue one), don't suppose you got it have you?

quin · 30-09-2008, 04:14 PM

ive only got the black one for the boot im afraid chap

**RichHimself** · 30-09-2008, 04:20 PM

Ah no worries, always worth asking.

Cheers buddy.

quin · 26-02-2009, 03:04 PM

buuuump

quin · 15-03-2009, 08:02 PM

bumparooooo

quin · 18-03-2009, 06:27 PM

wheel boss sold, wheel still available... offers

quin · 28-03-2009, 05:08 PM

bump... please buy my things lmao

quin · 05-04-2009, 06:46 PM

bump

jdizzy · 06-04-2009, 06:31 PM

20 posted for yellow stuff?

quin · 06-04-2009, 07:06 PM

yea ok mate

paypal ok?

jdizzy · 06-04-2009, 07:23 PM

you have a pm

quin · 10-04-2009, 08:53 AM

you still wanting pads matey?

green machine · 10-04-2009, 09:00 AM

dude.. do you have adrivers side wishbone that will fit my gti struts

quin · 10-04-2009, 03:35 PM

yea mate there the same, it needs a new rear bush other than that its fine

£15

quin · 20-04-2009, 05:07 PM

bumpage

Edinnit · 20-04-2009, 07:34 PM

If youve still got the wishbones at the next meet mate ill have them....are they the solid ones....the same as gti ones yea?

quin · 20-04-2009, 07:35 PM

they are indeedy

got one chap possibly going to pm me, if he doesnt then il pop them aside mate

Edinnit · 20-04-2009, 07:47 PM

Cheers mate nice one!!

quin · 23-04-2009, 05:12 PM

bump.... clearup

quin · 05-05-2009, 07:04 PM

bump, everything in 1st post available

yozer13 · 05-05-2009, 07:11 PM

£20 for the mintex delievered?Do they deffo fit an s1 calliper. Can send payment right now.

will pay the paypal fees too.

quin · 05-05-2009, 07:13 PM

yep they defo do fit a s1 caliper

stick another £2 on for paypal and there yours

and ill get em posted in the morning

yozer13 · 05-05-2009, 07:14 PM

Quote:

Originally Posted by quin

yep they defo do fit a s1 caliper

stick another £2 on for paypal and there yours

I'll pay the fees if you want so you will get £20 smack on.

whats your paypal?

quin · 05-05-2009, 07:15 PM

ill pm you

MINTEX SOLD

quin · 10-05-2009, 06:22 PM

bump

quin · 25-05-2009, 06:53 PM

buuump

quin · 03-06-2009, 05:34 PM

top post updated, offers taken on everything

coulty · 10-06-2009, 07:46 PM

have you still got the s1 ecu for sale?

Is it a standard map on it?

Thanks
Stuart

quin · 10-06-2009, 07:50 PM

yes and yes

quin · 14-06-2009, 03:33 PM

bump

quin · 18-06-2009, 03:13 PM

momo wheel, rallye ecu's, rallye loom - sold
decat and interior light - provisionally sold

quin · 26-06-2009, 01:53 PM

bump, everything in list still available, still take offers on everything... try me

quin · 08-07-2009, 07:29 PM

de-cat sold, offers taken on everything else

quin · 16-07-2009, 03:34 PM

bump

quin · 23-07-2009, 02:39 PM

bump

quin · 13-10-2009, 03:27 PM

bumpage, ill take silly offers on anything

quin · 28-10-2009, 07:45 PM

bumperooooo

27-11-2007, 06:14 PM	#1
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	shed clearout!!! SUSPENSION pair of trailing arms complete with hubs and cylenders, need bearings, could make for a quick swap on a beam refurb £10 pair Rear anti roll bar from 106 1.4 xs £10 Pair of FAI wishbones these only covered around 6k so are still nice and clean and bushes are all mint, however both balljoints need replacing as these died prematurely £40 pair SENSORS/RELAYS/ECUS Rear wiper relay, in gwo (also lots of other random relays collected from 106’s and 306’s if anything needed I’ll have a look) £3 each 306 1.4xl spi ecu (bosch) £5 BRAKES Standard used brake hoses £2.50 each INTERIOR/PLASTICS s1 rallye fuel pump - return stub snapped off, just swap motor into your casing £20 Centre section of cam belt cover, v-good condition £4 Top half of steering wheel plastics £3 Ignition lead rack, only 2 clips snapped, so still holds cables perfect £2 plastic bracket from steering wheel which holds the stalks £3 Interior light £2 Rear seat brackets (bottom half of bench slots onto them) £2 ENGINE BAY Interediate bearing carrier for 2 peice o/s shaft £15 XSI dipstick tube £2 EXTERIOR Damaged s1 rallye n/s/f arch. mising clips, and the front has been broken off, could be fibreglassed though if you have some artistic flare £3 smoked front indicators, bought these with the expectation of getting black morretes, but didnt lol, ok Sondition gota be worth £10 s1 near side rear light unit, crack in lense but otheriwse fine, handy if water has corroded yours £5 s1 off side rear light unit, £10 s1 headlights £9 each or £15 pair 306 s1 standard rear lights v-good condition £5 pair 306 s1 near side front indicator unit £3 All prices are + delivery and open to offers. if you would like photos and any extra details then just pm me. thanks Last edited by quin; 07-04-2010 at 03:33 PM. Reason: update

29-07-2008, 03:49 PM	#2
freddy6868 106 RALLYE REGISTER MEMBER & SOUTH WALES GROUP LEADER Join Date: Jan 2008 Location: bridgend Posts: 3,605	air temp sensor is that the one that goes in the right hand side of the airbox? __________________ Engine:C2 VTS JP4 engine, JP4 cam covers, J4 cams, followers, valve springs and caps, Lightened flywheel, Pug racing gear linkages, heat wrapped 4-2-1 raceland manifold, 2" decat pugsport system, Pugsport group N engine mounts, powerflex exhaust mounts, 106 GTI airbox with K&N pannel filter, standard,S2 gearbox, 153bhp @ 7,310rpm 112ft/lbs @ 6,739rpm Interior:Standard interior apart from Sparco Evo bucket seats, Sabbelt 3" 6 point harnesses Body:Brand new S1 vinals all round, red FG bonnet Chassis:Poly bushed diesel spec wishbones, lowered on Gaz coilovers on the front adjustable height -40mm-90mm, S1 rear beam poly bushed and lowered 45mm with Rear Gaz rear dampers, S2 steelies, Brakes:Front brakes:Godspeed brake set up consisting of Brembo Max disks (on order), standard calipers and mintex 1155 pads with braided flexi pipes. Rear brakes: standard S1 drums and shoes with goodridge flexi pipes SEX, PUGS AND ROCK 'N' ROLL

29-07-2008, 03:58 PM	#4
freddy6868 106 RALLYE REGISTER MEMBER & SOUTH WALES GROUP LEADER Join Date: Jan 2008 Location: bridgend Posts: 3,605	yay do i win anything?lol and is it for an s1? __________________ Engine:C2 VTS JP4 engine, JP4 cam covers, J4 cams, followers, valve springs and caps, Lightened flywheel, Pug racing gear linkages, heat wrapped 4-2-1 raceland manifold, 2" decat pugsport system, Pugsport group N engine mounts, powerflex exhaust mounts, 106 GTI airbox with K&N pannel filter, standard,S2 gearbox, 153bhp @ 7,310rpm 112ft/lbs @ 6,739rpm Interior:Standard interior apart from Sparco Evo bucket seats, Sabbelt 3" 6 point harnesses Body:Brand new S1 vinals all round, red FG bonnet Chassis:Poly bushed diesel spec wishbones, lowered on Gaz coilovers on the front adjustable height -40mm-90mm, S1 rear beam poly bushed and lowered 45mm with Rear Gaz rear dampers, S2 steelies, Brakes:Front brakes:Godspeed brake set up consisting of Brembo Max disks (on order), standard calipers and mintex 1155 pads with braided flexi pipes. Rear brakes: standard S1 drums and shoes with goodridge flexi pipes SEX, PUGS AND ROCK 'N' ROLL

29-07-2008, 04:12 PM	#6
freddy6868 106 RALLYE REGISTER MEMBER & SOUTH WALES GROUP LEADER Join Date: Jan 2008 Location: bridgend Posts: 3,605	can you take a pic of one on the car please as i am not sure if its what i want i thought the air temp sensor went in the side of the airbox? __________________ Engine:C2 VTS JP4 engine, JP4 cam covers, J4 cams, followers, valve springs and caps, Lightened flywheel, Pug racing gear linkages, heat wrapped 4-2-1 raceland manifold, 2" decat pugsport system, Pugsport group N engine mounts, powerflex exhaust mounts, 106 GTI airbox with K&N pannel filter, standard,S2 gearbox, 153bhp @ 7,310rpm 112ft/lbs @ 6,739rpm Interior:Standard interior apart from Sparco Evo bucket seats, Sabbelt 3" 6 point harnesses Body:Brand new S1 vinals all round, red FG bonnet Chassis:Poly bushed diesel spec wishbones, lowered on Gaz coilovers on the front adjustable height -40mm-90mm, S1 rear beam poly bushed and lowered 45mm with Rear Gaz rear dampers, S2 steelies, Brakes:Front brakes:Godspeed brake set up consisting of Brembo Max disks (on order), standard calipers and mintex 1155 pads with braided flexi pipes. Rear brakes: standard S1 drums and shoes with goodridge flexi pipes SEX, PUGS AND ROCK 'N' ROLL

30-07-2008, 03:14 PM	#8
freddy6868 106 RALLYE REGISTER MEMBER & SOUTH WALES GROUP LEADER Join Date: Jan 2008 Location: bridgend Posts: 3,605	yeah please lol __________________ Engine:C2 VTS JP4 engine, JP4 cam covers, J4 cams, followers, valve springs and caps, Lightened flywheel, Pug racing gear linkages, heat wrapped 4-2-1 raceland manifold, 2" decat pugsport system, Pugsport group N engine mounts, powerflex exhaust mounts, 106 GTI airbox with K&N pannel filter, standard,S2 gearbox, 153bhp @ 7,310rpm 112ft/lbs @ 6,739rpm Interior:Standard interior apart from Sparco Evo bucket seats, Sabbelt 3" 6 point harnesses Body:Brand new S1 vinals all round, red FG bonnet Chassis:Poly bushed diesel spec wishbones, lowered on Gaz coilovers on the front adjustable height -40mm-90mm, S1 rear beam poly bushed and lowered 45mm with Rear Gaz rear dampers, S2 steelies, Brakes:Front brakes:Godspeed brake set up consisting of Brembo Max disks (on order), standard calipers and mintex 1155 pads with braided flexi pipes. Rear brakes: standard S1 drums and shoes with goodridge flexi pipes SEX, PUGS AND ROCK 'N' ROLL

29-07-2008, 03:54 PM	#3
Nathan Morris 106 RALLYE REGISTER MEMBER Join Date: Nov 2007 Location: pembrokeshire Posts: 412	your rite john!

29-07-2008, 04:06 PM	#5
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	its for an s1 yea, goes in the side of the throttle body (bulkhead side) i can take pics of things to people if your usure

29-07-2008, 04:30 PM	#7
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	not on the s1 rallye it doesnt, no senosrs go in the airbox on the s1 rallye lol, can still take a piccy if you need

30-07-2008, 03:34 PM	#9
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	http://www.106rallyeforum.com/forum2...light=air+temp ok in the 10th post on there, in the third pic down you can see the air temp sensor (grey) at the bottom of the photo, it has a wire which then goes into the side of the body, hope that helps, its the s2 that has it in the airbox

01-09-2008, 07:08 PM	#10
bobdylan_55 106 RALLYE REGISTER FRUITCAKE Join Date: Jun 2007 Location: derby Posts: 5,234	dont surpose youve got a spare throttle position sensor? :P

02-09-2008, 06:42 AM	#11
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	sorry, sold it with my spare throttle body

30-09-2008, 03:44 PM	#12
RichHimself 106 RALLYE REGISTER MEMBER Join Date: Apr 2008 Location: Stroud, Gloucestershire Posts: 1,366	Is the rear wiper relay the one for the front under the glovebox? Do you know if it controls the washer motor for the front? If so I'm interested in the relay.

30-09-2008, 03:59 PM	#13
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	sorry chap, its the small black one that sits with the rear wiper motor in the boot, its a blue one under the dash for the front intermittent wipe etc not sure if it controlls the washer pump too?

30-09-2008, 04:09 PM	#14
RichHimself 106 RALLYE REGISTER MEMBER Join Date: Apr 2008 Location: Stroud, Gloucestershire Posts: 1,366	Ah that's the one I'm after (the Blue one), don't suppose you got it have you?

30-09-2008, 04:14 PM	#15
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	ive only got the black one for the boot im afraid chap

30-09-2008, 04:20 PM	#16
RichHimself 106 RALLYE REGISTER MEMBER Join Date: Apr 2008 Location: Stroud, Gloucestershire Posts: 1,366	Ah no worries, always worth asking. Cheers buddy.

26-02-2009, 03:04 PM	#17
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	buuuump

15-03-2009, 08:02 PM	#18
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	bumparooooo

18-03-2009, 06:27 PM	#19
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	wheel boss sold, wheel still available... offers

28-03-2009, 05:08 PM	#20
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	bump... please buy my things lmao

05-04-2009, 06:46 PM	#21
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	bump

06-04-2009, 06:31 PM	#22
jdizzy RECENTLY EXPIRED Join Date: Mar 2009 Location: Telford, Shropshire Posts: 364	20 posted for yellow stuff?

06-04-2009, 07:06 PM	#23
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	yea ok mate paypal ok?

06-04-2009, 07:23 PM	#24
jdizzy RECENTLY EXPIRED Join Date: Mar 2009 Location: Telford, Shropshire Posts: 364	you have a pm

10-04-2009, 08:53 AM	#25
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	you still wanting pads matey?

10-04-2009, 09:00 AM	#26
green machine REGISTERED FORUM USER Join Date: Dec 2008 Location: ipswich Posts: 46	dude.. do you have adrivers side wishbone that will fit my gti struts

10-04-2009, 03:35 PM	#27
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	yea mate there the same, it needs a new rear bush other than that its fine £15

20-04-2009, 05:07 PM	#28
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	bumpage

20-04-2009, 07:34 PM	#29
Edinnit FREELOADER! 100+ posts still not joined :-( Join Date: Aug 2008 Location: Peterborough Posts: 100	If youve still got the wishbones at the next meet mate ill have them....are they the solid ones....the same as gti ones yea?

20-04-2009, 07:35 PM	#30
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	they are indeedy got one chap possibly going to pm me, if he doesnt then il pop them aside mate

20-04-2009, 07:47 PM	#31
Edinnit FREELOADER! 100+ posts still not joined :-( Join Date: Aug 2008 Location: Peterborough Posts: 100	Cheers mate nice one!!

23-04-2009, 05:12 PM	#32
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	bump.... clearup

05-05-2009, 07:04 PM	#33
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	bump, everything in 1st post available

05-05-2009, 07:11 PM	#34
yozer13 RECENTLY EXPIRED Join Date: Feb 2008 Location: cardiff Posts: 728	£20 for the mintex delievered?Do they deffo fit an s1 calliper. Can send payment right now. will pay the paypal fees too. Last edited by yozer13; 05-05-2009 at 07:11 PM. Reason: Automerged Doublepost

05-05-2009, 07:13 PM	#35
quin RECENTLY EXPIRED Join Date: Nov 2006 Location: suffolk, uk Posts: 1,779	yep they defo do fit a s1 caliper stick another £2 on for paypal and there yours and ill get em posted in the morning Last edited by quin; 05-05-2009 at 07:13 PM. Reason: Automerged Doublepost